// Prototype statements for functions found within this file.

Uint16 j=0x0001;
short i ;
  
void Gpio_select(void);
void delay_loop(Uint16 loop_time);

void main(void)
{

// Step 1. Initialize System Control registers, PLL, WatchDog,
// peripheral Clocks to default state:
// This function is found in the DSP281x_SysCtrl.c file.
     InitSysCtrl();

// Step 2. Initalize GPIO:
// This example function is found in the DSP281x_Gpio.c file and
// illustrates how to set the GPIO to it's default state.
// InitGpio();   // Skipped for this example  

// Step 3. Clear all interrupts and initialize PIE vector table:
// Disable CPU interrupts
     DINT;

// Initialize PIE control registers to their default state.
// The default state is all PIE interrupts disabled and flags
// are cleared.  
// This function is found in the DSP281x_PieCtrl.c file.
     InitPieCtrl();

// Disable CPU interrupts and clear all CPU interrupt flags:
     IER = 0x0000;
     IFR = 0x0000;

// Initialize the PIE vector table with pointers to the shell Interrupt
// Service Routines (ISR).  
// This will populate the entire table, even if the interrupt
// is not used in this example.   This is useful for debug purposes.
// The shell ISR routines are found in DSP281x_DefaultIsr.c.
// This function is found in DSP281x_PieVect.c.
     InitPieVectTable();
    
// Step 4. Initialize all the Device Peripherals:
// This function is found in DSP281x_InitPeripherals.c
// InitPeripherals(); // Not required for this example

// Step 5. User specific code
  Gpio_select();
  
// *******************************************//
// ************       *************//

GpioDataRegs.GPACLEAR.all=0xFFFF; // All GpioAx to   OFF
GpioDataRegs.GPADAT.all=j;       // First led light ON
delay_loop(1000);                 // Delay 1[s]

while(1)                         //
{
  
  for(i=1;i<8;i++)               // The second led to eighth one lights by turns
  {
   j=0x0001<<(8*i);
   GpioDataRegs.GPADAT.all=j;
   delay_loop(1000);             // // Delay 1[s]
  }
  
  for(i=1;i<8;i++)
  {
   j=0x1000>>(8*i);             // The seventh led to first one lights by turns
   GpioDataRegs.GPADAT.all=j;
   delay_loop(1000);             // Delay 1[s]
  }

}
  

}

void Gpio_select(void)
{
         EALLOW;
    
       GpioMuxRegs.GPAMUX.all = 0x0000;     // Configure MUXs as digital I/Os
                                                                                    
       GpioMuxRegs.GPADIR.all = 0xFFFF;     // GPIO PORTs   as output
  
       GpioMuxRegs.GPAQUAL.all = 0x0000;   // Set GPIO input qualifier values
  
       EDIS;        
}        

//   **********************************************   //
// Delay time function : set i[ms] with delay time function
//   **********************************************   //

void delay_loop(Uint16 loop_time)
{
       short           i;
      
       for (i = 0; i < loop_time; i++) {asm(" RPT #100000 ||NOP ");}
}